With the calculations of measurements and angles available the next step was to design a jig to hold the wheel discs while the spoke holes are drilled.
Thursday, 8 September 2011
Wooden Three Wheeler Wheels
After measuring the wheels on Dave Smith's three wheeler I adjusted the POVray code to give me three views of wheel blanks without shaping the rim and tire. And I added text to report the measurements and angles.
With the calculations of measurements and angles available the next step was to design a jig to hold the wheel discs while the spoke holes are drilled.
With the calculations of measurements and angles available the next step was to design a jig to hold the wheel discs while the spoke holes are drilled.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment